Nokia 6256i manual Battery, Remove the back cover, Remove the battery, UIM Cdma SIM card slot

Models: 6256i

1 123
Download 123 pages 23.45 Kb
Page 16
Image 16

Set up your phone

Battery

Note: Before removing the cover, always switch off the power and disconnect the charger and any other device.

Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.

Remove the back cover

1.With the back of the phone facing you, push down on the back cover.

2.Slide the back cover toward the bottom of the phone and remove.

Remove the battery

After you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

UIM (CDMA SIM) card slot

Your phone has a UIM card slot built into the mechanics. However, the UIM is not functional in this phone model. Avoid placing anything into the UIM card slot.

Install the MMC card

Before installing the MMC card, always make sure that the phone is switched off and that you have removed the cover and battery.

Open the MMC holder by lifting the latch (1) and lifting the holder up (2).

15

Copyright © 2005 Nokia

Page 16
Image 16
Nokia 6256i manual Battery, Remove the back cover, Remove the battery, UIM Cdma SIM card slot, Install the MMC card