Copyright2003 Nokia. All rights reserved. 136
•Connection security - Select On or Off.
When the connection security is On, the phone tries to use a secure
connection with the WAP service. If a secure connection is not available,
the connection will not be made. If you wish to connect anyway, with a
non-secure connection, you must set the connection security to Off.
•Data bearer - Select GMS data or GPRS.
•Bearer settings - Settings for the selected bearer, see Settings when GSM
data is the selected data bearer and Settings when GPRS is the selected
data bearer below.
For pricing, connection speed and other information, contact your network
operator or service provider.
Settings when GSM data is the selected data bearer•Dial-up number - Key in the phone number and press OK.
•IP address - Key in the address, press for a dot, and press OK. You obtain
the IP address from your network operator or service provider.
•Authentication type - Select Secure or Normal.
•Data call type - Select Analogue or ISDN.
•Data call speed - Select the speed you want to use, or select Automatic.
Automatic is available only if the current selected data call type is Analogue.
The actual data call speed depends on the service provider.
•Login type - Select Manual or Automatic.