[ 41 ]
Phone security
Security code
The security code controls access to features such as the security level and
is supplied with the phone. The preset code is 12345.
Note: If you enter the wrong security code five times in succession,
you will not be able to enter a code for five minutes, even if you
power off the phone between incorrect entries.
Once you change the security code from its preset of 12345, keep the new
code secret and in a safe place separate from your phone. Use this
procedure to change your security code.
1From the menus, select Settings > Security settings > Access codes >
Change security code.
After a brief pause, you are prompted to enter the current security
code (default is 12345).
2Enter the current security code and select OK.
You are prompted to enter the new security code.
3Enter the new security code (up to 10 characters) and select OK.
You are prompted to reenter the new security code for verification.
4Enter the new security code again and select OK.
A message appears in the display confirming your security code has
been changed.
PIN code
Before you can change your PIN code, you need to enable PIN code
request. See “PIN code request” on page 35.
1Select Menu > Settings > Security settings > Access codes >
Change PIN code.
After a brief pause, you are prompted to enter the current PIN code.
2Enter the PIN code and select OK.
You are prompted to enter the new PIN code.
3Enter the new PIN code and select OK.
You are prompted to reenter the new PIN code for verification.