Phone setup

• CHARGE THE BATTERY

Charge the new battery for three hours before using the phone. Use the phone until the battery is fully discharged. You should do this for a total of three charging cycles.

1With your phone turned off, connect

the lead from the charger to the bottom of the phone.

2Connect the charger to an AC wall outlet.

If the phone is turned on, the messages, Charger connected and Charging appear. The battery power indicator bar starts to scroll up and down (see “Indicators” on page 15). If the battery is completely discharged, it will take a few minutes before the charging indicator appears on the screen.

3The battery is charged when the battery indicator bar stops scrolling. Disconnect the charger from the AC outlet and the phone.

Note: If your service provider has activated your service, you can use the phone while the battery is charging; however, if the phone becomes too warm while you’re making a call, it automatically drops the current call and returns to the Start screen. You will not be able to make or receive calls until the phone cools.

When the charger is not in use

When the charger is not in use, disconnect it from the power source.

Do not leave the battery connected to the charger for longer than a week. Overcharging the battery could shorten its lifespan. If a fully charged battery is not used, it will discharge itself over time.

[ 9 ]

Page 16
Image 16
Nokia 8265i warranty Charge the Battery, When the charger is not in use