Use advanced calling features

The following procedure assumes that you have stored the Send own caller ID feature code in your phone and activated the feature. If you have not completed these two steps, you may be able to block caller

ID manually. To block caller ID manually, enter the code (for example,

) followed by the phone number that you’re calling,

then press .

1Press Menu 4 - 4 - 4 (Settings > Network services > Send own caller ID with next call).

2Highlight Yes (to show your number) or No (not to show your number). Press OK.

3Enter the number you are calling (or press Search to retrieve the number from the phone book), and press OK. Press OK again.

Your phone makes the call and requests that the network block caller ID to prevent the recipient of your call from seeing your name and phone number.

• SELECT A PHONE NUMBER

You can use two different phone numbers with your phone. Each phone number is used for a different service area.

When activating your phone, the service provider sets up your phone with account information (phone number and system information).

However, your phone can be activated in up to two different service areas. For example, your phone could be activated in Dallas and New York. Each service area assigns a different phone number or account to your phone.

You must select a phone number for your home system. If you travel outside your home system, you can choose another number. Only one phone number can be active at a time.

Note: You may not need two numbers for your phone if your service provider has service or roaming agreements for each area where you use your phone. Contact your service provider for details.

[ 41 ]

Page 52
Image 52
Nokia 8270 warranty Select a Phone Number, Followed by the phone number that you’re calling Then press