Nokia 8270 Choose a calling card to use, Make a calling card call, Choose to Block Caller ID

Choose a calling card to use

Note: If information for only one calling card is stored in your phone, you are not required to choose a calling card.

1Press Menu 4 - 1 - 3 (Settings > Call settings > Calling card).

2Scroll until the name of the calling card appears, and press Options.

3Scroll to Select, and press OK.

4Enter your security code, and press OK. The message Card ready for use appears.

Make a calling card call

Note: This procedure may not apply to all calling card options. For more information, refer to your calling card or contact your calling card company.

1At the Start screen, enter the phone number of the party you are calling. Include any necessary prefix, such as 0 or 1, that is specified by your calling card.

2Press and hold until the message Card call appears.

3When the message Wait for tone, then press OK appears, listen for the tone from your calling card service, then press OK. When the message Wait for tone, press OK again appears, listen for the tone, then press OK.

•CHOOSE TO BLOCK CALLER ID

In most service areas, when you call someone, their caller ID system allows them to see your name and phone number. Your phone is set to allow this information to be seen automatically. Before you make a call, you can choose to block caller ID and prevent the recipient from seeing your name and phone number.

NOTES

•This feature works on a per-call basis, so you must perform this procedure before each call where you want to block caller ID.

•While roaming, you may not be able to block caller ID.

[ 40 ]