INSTALLATION OF THE MEDIAMASTER
Connecting the Mediamaster
There are many different types of TV/VCR and other equipment you can connect to the Mediamaster.
In this manual you will see some of the most common ways to connect your equipment.
If you use RF leads you will have to tune your TV and VCR to the
Mediamaster output channel (see page 12).
If you have problems with your connections and need help, con- tact your dealer or Service Provider.
Connecting the Mediamaster to the TV
•Connect a SCART lead between the main SCART socket on the TV and the TV SCART socket on the Mediamaster.
•Connect an RF lead from the TV/VCR output on the Media-
master to the RF input socket on the TV. | SCART | RF |
|
•Connect the TV aerial to the TV AERIAL input socket on the Mediamaster.
Connecting a TV and VCR
Refer to your VCR’s manual for full instructions.
If your TV and VCR have two SCART-sockets
• | Connect a SCART lead between the main SCART socket on |
| the TV and the TV SCART socket on the Mediamaster. |
• Connect a SCART lead between the VCR and the AUX SCART | |
| socket on the Mediamaster. |
• | Connect a SCART lead between the VCR and the second |
| SCART socket on the TV. |
• | Connect an RF lead from the TV/VCR output on the Media- |
Aerial
SCART
Video
RF SCART | RF |
| master to the RF input socket on the VCR. |
• | Connect an RF lead from the RF output on the VCR to the TV |
| AERIAL input socket on the TV. |
• | Connect the TV aerial directly to the TV AERIAL input socket |
| on the Mediamaster. |
SCART
Media- master
If your VCR only has one |
• Follow connection details from above, but without the 3rd |
SCART lead. |
Your VCR will then need to be tuned to the Mediamaster. |
Aerial
RF
Video
RF SCART
Media-
SCART master
GB 10