Nokia DNT2Mi-fp user manual Front view, Power LED, Alarm LED

Front view

3 Front view

Figure 4 presents DNT2Mi-fp front view with LED indicators.

Power LED

DSL LED

Alarm LED

Figure 4. Front view of DNT2Mi-fp

When power is switched on, the unit performs an automatic self test, which is used to check the most vital operational functions of the equipment. After the test, the device is ready for use.

During the power-up test, the LEDs are lit in the following sequence:

1.All 3 LEDs are lit for 10 seconds.

2.The green power LED is blinking and others are off for 10 seconds during startup and self test.

3.The green power LED is lit and DNT2Mi-fp is ready for use.

The green DSL LED indicates state of the line.

DN0445814	© Nokia Corporation	11 (60)
Issue 2-0 en	Nokia Proprietary and Confidential