Nokia PM 3205 manual Using Voicectivated Dialing, Assigning a Voice Tag to a Phone Number

Using Voicectivated Dialing

In addition to Sprint PCS Voice CommandSM (see page 182), you can use a voice dial tag to automatically dial a phone number in your Phone Book. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 25 voice dial tags.

Voice tags are sensitive to background noise. Record them and make calls in a quiet environment. When recording a voice tag or making a call by saying a voice tag, hold the phone in the normal position near your ear. Very short names are not accepted. Use long names and avoid similar names for different numbers.

Note: You must say a voice command exactly as you did when you recorded it. This may be difficult in, for example, a noisy environment or during an emergency. You should not rely solely upon voice dialing in all circumstances.

Assigning a Voice Tag to a Phone Number

To use voice-activated dialing, you must first assign a voice command (voice tag) to the number you wish to call.

To assign a voice tag to a phone number:

1.Press the down scroll key to display your Contacts list.

2.Scroll to the contact to which you wish to assign a voice command and press Details. (The phone number associated with this contact is displayed.)

3.Press Options, scroll to Add voice tag, and press Select.

4.Press Start and speak the command clearly, as though you were speaking normally into the phone (for example, “Call Bill”). (The voice command indicator is displayed.)

5.Press Options to assign other features to this contact, or press

to return to the standby mode.

Note: Be sure to record your voice comands in a quiet environment and without the aid of accessories (hands-free device) to avoid capturing unwanted sounds. Unwanted sounds may cause your phone not to recognize your command when you attempt to use voice dialing.

Section 2I: Using Your Phone’s Voice Services 100