Nokia PM 3205 manual Creating Dialing Instructions, Placing a Calling Card Call

Creating Dialing Instructions

The service provider of your Calling Card account requires a specific sequence of numbers to be dialed before your call is completed. Dialing sequence sets up the needed format.

To create dialing instructions:

1.From the standby mode, press Menu, scroll to Settings, and press Select.

- or -

From Step 6 above, skip to Step 5 below.

2.Scroll to Call settings, press Select, scroll to Calling card, and press Select.

3.Enter your security code and press OK.

4.Scroll to Card A (or another card), press Options, scroll to Edit, and press OK.

5.Scroll to Dialing sequence and press Select.

6.Scroll to Access no. + phone no. + card no. (or other dialing sequence required by that account provider) and press Select.

7.Enter the first required number and press OK.

8.Enter the next required number and press OK to save. (The phone number, phone no., is selected when you actually make a call using this Calling Card account.)

Placing a Calling Card Call

After setting up the Calling Card and its dialing instructions, you are ready to place a phone call using your Calling Card.

To use your calling card account:

1.From the Calling card menu, scroll to select a calling card and press Options.

2.Scroll to Select and press OK. (“Card ready for use” is displayed.)

3.Enter the phone number you want to call and press for a few seconds until “Card call...” is displayed.

4.When you hear a tone or see a system message, press OK.

Section 2K: Additional Features 127