Nokia PM 3205 manual Installing the Battery, To install the LiIon battery

Installing the Battery

To install the battery, replace the battery, or to access your phone’s ESN (electronic serial number), you must first remove the phone back cover.

Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.

To remove the back cover, press the release button down and push the back cover away.

To install the LiIon battery:

1.Insert the battery (label side facing up) into the cavity at a

45-degree angle.( The metal contacts must be aligned with and touching the metal prongs.)

2.Press down on the battery until it snaps into place.

Section 2A: Your Sprint PCS Vision Phone The Basics 18