NordicTrack 30505.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own Phillips screwdriver . For help identifying the assembly hardware, see the hardware drawings below.

			Panel Screw
	Handrail Bolt (90)–4	3/4” Tek Screw
Console Bolt (110)–4
		(91)–4	(139)–3

Handrail BracketBolt (31)–4

UprightBolt (113)–4

Washer (116)–4	Star Washer
	(114)–4

1.Raise the end of the Frame (not shown) until the tread- mill can be moved on the front Wheels (66), and care- fully roll the treadmill off the wood pallet.

Insert the Wire Harness (108) and the TV Cable (109) through the Upright Plate (115).

With the help of a second person, hold the Upright (111) and the Upright Plate (115) against the Frame Cover

(52).See the inset drawing and make sure that the Upright is oriented at the angle shown and the Upright Plate is oriented as shown. Attach the Upright and the Upright Plate with four Upright Bolts

(113)with two Star Washers (114). Make sure that the

Upright Bolts are inserted strait into the Upright and Frame Cover. Do not tighten the Upright Bolts yet.

1	115
	111
		111
	66
	109	108
		114
	52
	115
	114	113

7