8. Hold the Left Rear Upper Body Cover (26) and | 8 |
|
|
|
|
| |
| the Left Front Upper Body Cover (27) around |
|
|
|
| 29 | |
| the left Upper Body Leg (24). Attach the Upper | 97 |
|
|
|
| |
| Body Covers with five M4 x 16mm Screws (97). |
|
|
|
| 28 | |
| Attach the Right Rear Upper Body Cover (28) |
| 27 |
|
| ||
| and the Right Front Upper Body Cover (29) |
|
|
|
| ||
| in the same way. |
|
| 24 |
|
| 26 |
|
|
|
|
|
| ||
|
|
|
|
|
|
| 97 |
9. | Apply a small amount of grease to the axle on | 9 |
| 24 |
|
|
|
| the Left Link Arm (30), to the axle on the Left |
|
|
| 31 | ||
| Pedal Arm (32), and to a Wave Washer (100). |
|
|
|
|
| |
| Slide the Wave Washer (100) onto the axle on |
|
| 74 |
|
|
|
| the Left Pedal Arm (32). Next, slide a Link Arm | Grease |
|
|
|
| |
| Spacer (74) onto the axle on the Left Link |
|
|
|
|
| |
| Arm (30). |
|
|
|
|
|
|
| Then, insert the axle on the Left Link Arm (30) |
|
|
| 100 |
|
|
| into the left Upper Body Leg (24) while sliding |
|
|
|
|
| |
| the Left Link Arm onto the axle on the Left Pedal |
|
| 30 |
| 32 |
|
| Arm (32). |
|
|
|
| ||
| Repeat this step with the Right Link Arm (31). |
|
|
| Grease |
| |
10. | Attach the Left Link Arm (30) to the Left Pedal | 10 |
| 24 |
|
|
|
| Arm (32) with an M8 x 15mm Button Screw |
|
|
|
| ||
| (106), an M8.5 x 16mm x 1.5mm Washer (103), |
|
|
|
| 106 | 31 |
| and an Axle Cover (66). |
|
| 74 |
| ||
| Attach the Left Link Arm (30) to the left Upper | 66 | 103 |
| |||
| Body Leg (24) with an M8 x 25mm Button |
| 66 |
|
| ||
| Screw (110), two M8.5 x 16mm x 1.5mm | 103 |
|
|
|
|
|
| Washers (103), two Axle Covers (66), a Link | 110 |
|
|
|
|
|
| Arm Spacer (74), and an M8 x 15mm Button |
|
| 30 |
|
|
|
| Screw (106) as shown. |
|
|
|
|
| |
| Attach the Right Link Arm (31) in the same |
|
| 106 |
|
|
|
| way. |
|
|
| 103 | 66 | 32 |
|
| 9 |
|
|
|
|
|
