10.Tip: Be careful not to pinch the wire har- nesses during this step.
While another person holds the Console (11) near the Upright (10), connect the console wire harness to the Upper Wire Harness (65).
Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78).
10
|
| 10 |
11 |
|
|
| 65 | 78 |
Console Wire |
| |
|
| |
Harness |
| 78 |
Avoid pinching the
wire harnesses during this step
11.Orient a Link Arm (30) as shown. Identify the Right Pedal (35), which is marked with an “R” sticker. Attach the Right Pedal to the Link Arm with three M8 x 45mm Button Screws (90), three M8 Split Washers (97), and three M8 x 23mm Washers (31).
Repeat this step for the Left Pedal (not shown) and the other Link Arm (not shown).
11
35
30
31
31
97 | 97 |
| 90 |
10
