3.Locate the two tabs on the Reading Rack (12). Slide the tabs up into the two slots in the front of the Console (78). Attach the Reading Rack to the Console with six Screws (43).
4.Remove the two indicated Screws (43) from the left Upright (70).
Attach the Storage Latch (5) and the two Latch Spacers
(93)to the left Upright (70) with the two Screws (43). Be careful not to overtighten the Screws.
Note: If it is difficult to fold or lower the treadmill, remove one or both of the Latch Spacers (93).
5.Remove the backing from the Wrench Clip (88). Press the Wrench Clip onto the lower end of the Upright (70) in the indicated location. Press the Allen Wrench (87) into the Wrench Clip.
3 | 12 |
|
| Tabs | |
|
| |
| 78 |
|
| 43 |
|
|
| 43 |
4 |
|
|
| 93 | 70 |
|
| |
| 43 |
|
| 5 |
|
5 |
|
|
| 70 | 89 |
|
| 88 |
6.Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to protect the floor or carpet.
7
