NordicTrack 831.298810 Follow your progress with the five displays. Pulse display, Speed display

Models: 831.298810

1 30
Download 30 pages 44.92 Kb
Page 13
Image 13

8Follow your progress with the five displays. PULSE display

For this display to be active, the heart rate monitor must be worn. To put on the heart rate monitor, see How to

Use the CardioTrack

Heart Rate Monitor on page 8. After a few seconds, the heart-shaped indicator beside the PULSE display will flash each time your heart beats. Three dashes will then appear in the PULSE display and your heart rate will be shown. Note: The heart rate monitor will sample your heart rate every few seconds. It may take up to ten seconds before an accurate heart rate is shown. If your heart rate is not shown, see Heart Rate Monitor Trouble-shootingon page 8.

CALORIES display

This display shows the approximate number of calories you have burned.

TIME/PACE display

This display shows the

total time that the walk- ing belt has been mov- ing and your current pace (pace is measured

in minutes per mile).

The display will change from one number to the other every seven seconds. Indicators below the display will show which number is currently shown. Note: When a HEART RATE or INCLINE program is selected, the display will show the time remaining in the program rather than the elapsed time.

SPEED display

This display shows the

current speed of the walking belt. Note: When the SPEED but- tons are pressed, the

display will show the

selected speed setting for six seconds. The display will then show the actual speed of the walking belt.

Note: The speed can be shown in either miles per hour (mph) or kilometers per hour (kph). The KPH indicator beside the SPEED display will light when the speed is shown in kph. To change the unit of measurement, first hold down the STOP button while inserting the key

into the console. An ÒEÓ

for English (miles) or an ÒMÓ for Metric (kilome- ters) will appear in the PULSE display. Press

the SPEED Ò+Ó button

to change the unit of measurement. Remove and then reinsert the key.

DISTANCE/INCLINE display

This display shows the

distance that the walk- ing belt has moved and the current incline level of the treadmill. Every

seven seconds, the

display will change from one number to the other. Indicators below the display will show which number is currently shown.

Note: When the INCLINE buttons are pressed, the display will change to show the selected incline set- ting. If the KPH indicator beside the SPEED display is dark, the distance will be displayed in miles. If the KPH indicator is lit, the distance will be displayed in kilometers.

9

When you are finished exercising, stop the

walking belt and remove the key.

 

 

Step onto the foot rails

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and press the STOP

 

 

 

 

 

 

button. Change the

 

 

 

 

 

 

incline of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

treadmill to 1.5%. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

incline must be at

 

1.5% before the treadmill is folded to the storage

 

position or the treadmill may be damaged.

 

Remove the key from the console. Store the key in a

 

secure place. In addition, press the on/off switch to

 

the off position. (See the drawing near the top of

 

page 12.)

13

Page 13
Image 13
NordicTrack 831.298810 Follow your progress with the five displays. Pulse display, Calories display, TIME/PACE display