4. Slide the upper end of a Handrail (85) and then the | 4 |
| |
Extension Leg (103) into the right Upright (82) as shown. |
| ||
|
| ||
(Note: It may be helpful to tip the Uprights [82] forward as |
|
| |
you insert the Extension Leg. If necessary, tap the |
|
| |
Extension Leg with a rubber mallet to fully insert it.) |
|
| |
Slide the other Handrail (85) into the left Upright (82) as | 85 | 85 | |
| |||
82 | 82 | ||
described above. | |||
|
|
|
|
|
|
|
| 103 |
5. With the help of a second person, carefully tip the Uprights | 5 |
|
| 97 |
| |
(82) down as shown. | Make sure that the Extension |
|
|
| ||
|
|
|
| |||
Legs (103) and Handrails (85) remain in the Uprights. |
|
|
|
|
| |
Next, attach each Extension Leg (103) with two Screws |
|
|
|
| 82 | |
|
|
|
|
| ||
(101) and a Base Pad (116) as shown in drawing 5. |
|
|
|
| 116 | |
Make sure that the Extension Legs are fully inserted into |
|
|
|
| 101 | |
the Uprights (82) and push down on the Uprights as you |
|
|
|
| ||
|
|
|
| 103 | ||
tighten the Screws. Tighten the Handrail Bolts (78). |
|
|
|
| ||
|
|
|
| 97 | ||
|
|
| 82 |
|
| |
Note: One replacement Base Pad (116) and Spacer (not |
| 116 | 85 | 78 | ||
shown) are included. If a Base Pad becomes worn and |
| 103 |
|
| ||
| 101 |
|
| |||
needs to be replaced, use the replacement Base Pad. If |
|
|
|
| ||
85 |
| 97 |
|
| ||
a Thick Base Pad (97) needs to be replaced, use the re- |
|
|
| |||
|
|
|
|
| ||
placement Base Pad with the Spacer. |
|
|
| 78 |
|
|
With the help of a second person, carefully tip the
Uprights (82) back to the upright position.
6. Make sure that all parts are tightened before you use the treadmill.Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 21). To protect the floor or carpet from damage, place a mat under the treadmill.
7
