NordicTrack CMX500 user manual Problem The walking belt slows when walked on, Power Cord

PROBLEM: The walking belt slows when walked on
SOLUTION:	a. Use only a UL-listed surge protector, rated at 15 amps, with a 1 mm	2 (14-gauge) cord of five feet
	or less in length.

b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and		UNPLUG THE
POWER CORD	. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to

7 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power

cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is properly tight- ened.

PROBLEM: The walking belt is off-center or slips when walked on

b	3”–4”
Rear Roller Adjustment Bolts

SOLUTION:	a.	If the walking belt has shifted to the left,		first remove
		the key and	UNPLUG THE POWER CORD	. Using the
		allen wrench, turn the left rear roller adjustment bolt
		clockwise, and the right bolt counterclockwise, 1/4 of a
		turn each. Be careful not to overtighten the walking belt.
		Plug in the power cord, insert the key and run the tread-
		mill for a few minutes. Repeat until the walking belt is
		centered.
	b.	If the walking belt has shifted to the right,		first re-
		move the key and	UNPLUG THE POWER CORD	.
		Using the allen wrench, turn the left rear roller adjust-
		ment bolt counterclockwise, and the right bolt clockwise,
		1/4 of a turn each. Be careful not to overtighten the
		walking belt. Plug in the power cord, insert the key and
		run the treadmill for a few minutes. Repeat until the
		walking belt is centered.
	a. If the walking belt slips when walked on, first remove
		the key and	UNPLUG THE POWER CORD	. Using the
		allen wrench, turn both rear roller adjustment bolts

clockwise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each side of

the walking belt 5 to 7 cm (3 to 4 in.) off the walking platform. Be careful to keep the walking belt centered.

Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

c

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

	CD’s and videos are played
SOLUTION:	a. With the key inserted into the console, press one of the INCLINE buttons.		While the incline is
	changing, remove the key.	After a few seconds, re-insert the key. The treadmill will automati-

cally rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline.

21