NordicTrack NCTL09990 manual Unplug the Power Cord

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-

come damaged. Remove the key andUNPLUG THE

POWER CORD . Using the allen wrench, turn both rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7 to

10 cm off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

c. If the walking belt still slows, please call our Customer Service Department.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b

7–10 cm

Rear Roller Adjustment Bolts

PROBLEM: The walking belt is off-centre

SOLUTION:	a.	If the walking belt has shifted to the left,		first remove
		the key and	UNPLUG THE POWER CORD	. Using the
		allen wrench, turn the left rear roller adjustment bolt clock-
		wise, and the right bolt counterclockwise, 1/4 of a turn each.
		Be careful not to overtighten the walking belt. Plug in the
		power cord, insert the key and run the treadmill for a few
		minutes. Repeat until the walking belt is centred.
	b.	If the walking belt has shifted to the right,		first remove
		the key and	UNPLUG THE POWER CORD	. Using the
		allen wrench, turn the left rear roller adjustment bolt coun-
		terclockwise, and the right bolt clockwise, 1/4 of a turn
		each. Be careful not to overtighten the walking belt. Plug
		in the power cord, insert the key and run the treadmill for
		a few minutes. Repeat until the walking belt is centred.

PROBLEM: The walking belt slips when walked on

a

b

SOLUTION:	a. If the walking belt slips when walked on, first remove the
	key and	UNPLUG THE POWER CORD	. Using the allen

wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 7 to 10 cm off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the

key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:	a. With the key in the console, press one of the Incline buttons.		Whilst the incline is changing, re-
	move the key.	After a few seconds, re-insert the key. The treadmill will automatically rise to the
	maximum incline level and then return to the minimum level. This will recalibrate the incline.

24