NordicTrack NCTL09990 manual Operation and Adjustment

Models: NCTL09990

1 30
Download 30 pages 26.93 Kb
Page 8
Image 8

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBE

TM WALKING BELT

 

electric shock. This product is equipped with a cord

 

 

 

 

having an equipment-grounding conductor and a

Your treadmill features a walking belt coated with

 

grounding plug.

Plug the power cord into a surge

PERFORMANT LUBE

TM

, a high-performance lubricant.

protector, and plug the surge protector into an ap-

Important: Never apply silicone spray or other sub-

 

propriate outlet that is properly installed and

stances to the walking belt or the walking platform.

 

grounded in accordance with all local codes and

They will deteriorate the walking belt and cause ex-

 

ordinances.

 

 

cessive wear.

 

 

 

 

 

 

 

 

 

 

This product is for use on a nominal 120-volt circuit,

HOW TO PLUG IN THE POWER CORD

 

 

and has a grounding plug that looks like the plug illus-

 

 

 

 

trated in drawing 1 below. A temporary adapter that

DANGER:

 

 

looks like the adapter illustrated in drawing 2 may be

Improper connection

 

used to connect the surge protector to a 2-pole recep-

 

tacle as shown in drawing 2 if a properly grounded out-

of the equipment-grounding conductor can

 

 

let is not available.

 

 

result in an increased risk of electric shock.

 

 

 

 

 

 

 

Check with a qualified electrician or service-

 

The temporary adapter should be used only until a

man if you are in doubt as to whether the

 

 

properly grounded outlet (drawing 1) can be installed

product is properly grounded. Do not modify

 

 

by a qualified electrician.

 

the plug provided with the product—if it will

 

 

 

 

 

 

not fit the outlet, have a proper outlet in-

 

The green-colored rigid ear, lug, or the like extending

stalled by a qualified electrician.

 

 

from the adapter must be connected to a permanent

 

 

 

 

 

 

 

 

ground such as a properly grounded outlet box cover.

Your treadmill, like any other type of sophisticated

 

Whenever the adapter is used it must be held in place

 

by a metal screw.

Some 2-pole receptacle outlet box

electronic equipment, can be seriously damaged by

 

 

covers are not grounded. Contact a qualified elec-

sudden voltage changes in your home’s power.

 

 

trician to determine if the outlet box cover is

Voltage surges, spikes, and noise interference can re-

 

 

grounded before using an adapter.

 

sult from weather conditions or from other appliances

 

 

 

 

 

 

being turned on or off.

 

 

 

 

 

To decrease the pos-

1

 

 

 

 

sibility of your tread-

 

Grounded Outlet Box

 

 

mill being damaged,

 

 

Treadmill Power Cord

 

 

 

 

 

always use a surge

 

 

Grounding Pin

 

 

protector (not in-

 

 

 

 

 

 

 

 

 

cluded) with your

 

 

Grounding Plug

Grounding Plug

 

treadmill.

 

 

 

 

 

 

 

 

 

 

 

Surge protectors are

 

 

 

Grounding Pin

 

sold at most hardware

 

Grounded Outlet

 

 

 

 

stores and department

 

 

 

 

 

stores. Use only a CUL-

 

 

 

 

 

listed surge protector,

2

 

 

 

 

rated at 15 amps, with a

Grounded Outlet Box

 

 

 

 

 

14-gauge cord of five

 

 

 

 

 

feet or less in length.

 

 

Adapter

 

 

This product must be

 

 

Grounding Pin

 

 

 

 

 

 

 

grounded.

If it should

 

 

Grounding Plug

Surge Protector

malfunction or break

 

 

 

 

 

 

 

 

down, grounding pro-

Lug

 

 

 

 

vides a path of least re-

 

 

 

 

Metal Screw

 

 

 

 

sistance for electric cur-

 

 

 

 

rent to reduce the risk of

 

 

 

 

 

8

Page 8
Image 8
NordicTrack NCTL09990 manual Operation and Adjustment