ASSEMBLY
Make Things Easier for Yourself
This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The included Allen wrenches | and following |
tools (not included) are required for assembly: |
|
• Two adjustable wrenches |
|
Before beginning assembly, carefully read the |
| • | One rubber mallet | |||
following information and instructions: |
|
| ||||
|
|
|
| |||
• Assembly requires two people. |
|
| • | One standard screwdriver | ||
|
|
|
| |||
• For help identifying small parts, use the |
| • | One Phillips screwdriver | |||
PART |
| |||||
| IDENTIFICA | TION CHART | on page 5. |
| • | Lubricant, such as grease or petroleum jelly, |
|
|
|
|
|
| and soapy water. |
•Tighten all parts as you assemble them, unless
instructed to do otherwise. | Assembly will be more convenient if you have a |
• As you assemble the weight bench, make sure all | socket set, a set of |
wrenches, or a set of ratchet wrenches. | |
parts are oriented as shown in the drawings. |
|
1.
Before beginning assembly, make sure you understand the information in the box above.
Attach a Wheel (26) to the Stabilizer (2) with an
M10 | x 63mm Button Head Bolt (37), an 15mm x | |
43mm Axle (27), an M10 Washer (33), and an | ||
M10 | Nylon Locknut (32). | Repeat this step with |
the other Wheel. |
|
2.Press a 50mm x 75mm Inner Cap (25) into the Frame (1). Press two 38mm x 100mm Inner Caps
(45)into the top of the arms on the Frame.
Attach the Frame (1) to the Stabilizer (2) with four M10 x 115mm Carriage Bolts (35), four M10 Washers (33), and four M10 Nylon Locknuts (32).
1 |
|
26 |
|
32 | 33 |
| 26 |
| 27 |
2 |
|
| 37 |
2 |
|
| 35 |
45 | 25 |
| |
1 |
|
Arms | 2 |
33 |
|
33 |
|
32 | 32 |
|
6