NordicTrack NTCCSY9897.0 user manual See . Tighten the M10 x 20mm Button Screws

2. Attach the Base Plate (3) to the Base Legs (2)	2
with eight M6 x 20mm Screws (67) and eight M6
Large Washers (61).	2
See step 1. Tighten the M10 x 20mm Button		61
Screws (59).
Carefully tip the resistance system back into the				67
					2
operating position.
	61
		3
		61
	67
					67
3. Have a second person hold the Backrest (23)	3
near the Base (1). Connect the 4-pin Counter			33		68
				82
Wire Harness (39) to the 4-pin Console Wire
Harness (41). Next, connect the 3-pin Wire
Harness (42) to the 3-pin wire harness extend-
ing from the Backrest. Carefully push the wire		39
harnesses into the Base.
Attach the Backrest (23) to the Base (1) with	23	41
three M6 x 80mm Button Screws (68) and three		42
M6 Washers (82).
Press the Upright Cap (33) into the top of the		1			68
				82
Base (1).
4. Attach the Seat (24) to the Seat Frame (5) with	4
four M6 x 25mm Screws (72).
				24
5. Make sure that all parts are properly tight-			5
ened. The use of the remaining parts will be
explained in ADJUSTMENT, beginning on		72
PAGE 8.	72
	7