MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the elliptical exerciser regularly. Replace any worn parts immedi- ately.
For smooth |
| |
operation of the | Wheels | |
elliptical exer- | ||
| ||
ciser, inspect |
| |
and clean the |
| |
incline ramp | Incline | |
regularly using | Ramp | |
a soft cloth and |
| |
mild detergent. |
| |
Other parts of |
| |
the elliptical |
| |
exerciser can |
|
also be cleaned in this way. Keep liquids off the console. Never use abrasives or solvents.
PULSE SENSOR TROUBLESHOOTING
If the chest pulse sensor does not function properly, see CHEST PULSE SENSOR TROUBLESHOOTING on pages 9 and 10. If the handgrip pulse sensor does not function properly, see step 5 on page 14.
HOW TO CALIBRATE THE INCLINE RAMP
If the elliptical exerciser’s incline ramp does not func- tion properly, activate the calibration process by fol- lowing the steps below.
1. Hold down the Resistance 1 button and the |
Program Select button simultaneously for about |
five seconds. Note: If numbers appear in the main |
display, disregard the numbers. |
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han- dlebars firmly, and place one foot against the ramp in the location shown below. Pull the handlebars until the elliptical exerciser can be moved on the front wheels, and carefully move the elliptical exerciser to the desired location. Then, place one foot against the ramp, and lower the elliptical exerciser. Due to the size and weight of the elliptical exerciser, use extreme caution while moving and lowering it.
Handlebars |
Place your |
foot here |
Wheel |
HOW TO LEVEL THE ELLIPTICAL EXERCISER
2. | Press the Program Select button again. Note: A |
| combination of letters and numbers may appear in |
| the main display. |
3. | Press the 10° or 30° Ramp button. The ramp will |
| move all of the way up and then all of the way |
| down. |
4. | Press the Program Select button three times. The |
| console will then be in the normal operating mode |
| and the elliptical exerciser will be ready for use. |
If the elliptical exerciser rocks during use, turn one or both of the leveling feet under the rear stabilizer until the rocking motion is elimi- nated.
Leveling
Foot
26
