4.While another person holds the Upright (10) near the Frame (1), connect the Upper Wire Harness (65) to the Lower Wire Harness (64).
Then, insert the Upright (10) into the Frame (1). Attach the Upright with four M8 x 20mm Button Screws (85) and four M8 Split Washers (97). Do not tighten the Button Screws yet.
Avoid pinching the Wire Harnesses (64, 65) during this step.
5.Orient the Left and Right Upright Covers (19, 20) as shown. Attach the Upright Covers around the Upright (10) with five #8 x 1/2" Blunt Screws (92).
4
Avoid pinching the
Wire Harnesses (64, 65)
during this step
| 10 |
| 97 |
| 85 |
| 65 |
| 64 |
97 | 97 |
| |
85 | 1 |
| 97 |
5
92
92
20
10
92 19
7
