4. Identify the Left Pedal (34) and the Left Pedal

4

 

 

 

Arm (32), which are marked with stickers.

 

34

 

 

 

 

Attach the Left Pedal (34) to the Left Pedal

32

 

 

 

Arm (32) with two M6 x 62mm Screws (108),

 

 

 

two M6 x 35mm Screws (109), and four M6

 

 

 

 

Split Washers (102).

 

 

 

 

Attach the Right Pedal (not shown) to the

 

 

 

 

Right Pedal Arm (not shown) in the same

 

 

 

 

way.

 

102

 

 

 

 

 

 

 

 

109

102

 

 

108

 

 

 

 

109

 

 

 

 

 

 

 

 

102

 

5. Insert the Roller (38) on the Left Pedal Arm (32)

5

 

 

 

and the Roller on the Right Pedal Arm (33) into

 

 

116

 

 

 

the sides of the Ramp (5).

 

 

 

 

 

 

7

 

 

 

 

Attach the Rear Ramp Cover (7) to the

 

 

 

 

Ramp (5) with two M4 x 16mm Screws (116).

 

 

33

 

 

 

 

 

See the inset drawing. Lift the Pedal Arm

 

 

 

 

Latch (41) on the Left Pedal Arm (32) and set

 

 

 

 

the end of the Left Pedal Arm on the left Crank

 

 

 

 

Bushing Sleeve (54). Release the Pedal Arm

 

 

 

 

Latch; make sure that the Left Pedal Arm is

 

 

 

 

securely connected to the Crank Bushing

 

 

 

 

Sleeve.

 

 

 

38

 

 

5

 

Connect the Right Pedal Arm (33) to the

 

 

 

 

 

 

 

right Crank Bushing Sleeve (not shown) in

 

 

 

 

the same way.

 

 

 

 

 

 

 

32

 

 

 

32

 

 

 

 

41

 

 

 

 

54

 

 

7

 

 

 

Page 7
Image 7
NordicTrack NTEL7906.0 user manual See the inset drawing. Lift the Pedal Arm