7.Attach the Tray (90) to the handrail assembly with two #8 x 1/2" Screws (1).
With the help of a second person, hold the handrail assembly near the Right Upright (78) and the Left Upright (74). Connect the Upright Wire (38) to the console assembly wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON.
Remove the long wire tie from the Upright Wire (38).
8.Set the handrail assembly on the Uprights (74, 78). Be careful not to pinch the wires.
Attach the handrail assembly to the Uprights (74, 78) with six 5/16" x 1" Bolts (7) and six 5/16" Star Washers (10) as shown.
See assembly steps 4 and 6. Firmly tighten the 3/8" x 4" Bolts (6).
9.Hold the console assembly near the handrail as- sembly. Connect the two wires from the console assembly to the two wires from the handrail as- sembly. See the inset drawing in step 7. The connectors should slide together easily and snap into place. If they do not, turn one con- nector and try again. IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
7
1 |
|
90 | Handrail |
| |
1 | Assembly |
| 74 | |
Console |
| |
Wire | 38 | |
| ||
38 | Console | |
Wire | ||
|
|
|
| Wire Tie | 78 |
|
|
|
| |
8 |
|
|
| Handrail |
|
|
|
| Assembly |
| 10 | 7 | 7 |
|
7 | 10 |
|
|
|
|
|
|
| |
|
|
| 10 |
|
| 74 |
|
| 10 |
|
|
|
| |
|
|
| 7 | 78 |
9 |
|
|
|
|
| Console |
|
|
|
| Assembly |
|
|
|
Wires
Wires
Handrail
Assembly
9
