If you purchase the optional chest pulse sensor (see page 22), follow the steps below to install the re- ceiver included with the chest pulse sensor.
1. Make sure that the power cord is unplugged. |
|
|
|
Remove the indicated #8 x 3/4" Screw (12) and |
|
|
|
the Access Door (87) from the Console Back |
| 91 | |
(91). |
|
|
|
2. Connect the wire on the receiver (A) to the indi- |
|
|
|
cated wire extending from the Console Back |
|
|
|
(91). Hold the receiver so the small cylinder |
|
|
|
is oriented as shown and is facing the |
|
|
|
Console Back. Attach the receiver to the plastic |
|
|
|
posts on the Access Door (87) with the two in- |
|
|
|
cluded small screws. |
|
|
|
3. Make sure that no wires are pinched. |
|
|
|
Reattach the Access Door (87) with the #8 x |
|
|
|
3/4" Screw (12). Discard the other wires in- |
|
|
|
cluded with the receiver. |
|
|
|
|
|
| |
|
|
|
|
Small
Screws Small
Cylinder
A
87
Wire 
12
11
