4. Cut the plastic tie holding the Upright Wire Harness (98) in

4

 

81

the right Upright (69). Have a second person hold the

 

 

 

Handrails (66) near the Uprights as shown. Connect the

 

 

 

Upright Wire Harness (98) to the wire harness extending

 

 

98

from the Console Base (81). Insert the connectors and the

 

 

 

Upright Wire Harness into the hole in the right Upright.

 

 

 

Set the Handrails (66) on the Uprights (69), being careful

 

 

 

not to pinch the Upright Wire Harness (98).

 

 

69

 

 

 

5. Insert two Handrail Bolts (78) with Handrail Washers (77)

 

 

66

into the right Upright (69) and the right Handrail (66). Be

 

 

 

careful not to damage the Upright Wire Harness (not

 

 

 

shown). Next, lift the right Handrail (66) slightly and align

5

 

 

the Bolts with the holes in the Handrail. Thread the Bolts

 

 

69

into the Handrail. Do not tighten the Bolts yet.

 

 

Attach the left Handrail (not shown) in the same way.

 

 

 

Tighten all four Handrail Bolts (78).

 

 

 

6. Make sure that all parts are properly tightened before

 

66

77

 

 

you use the treadmill. Place a mat beneath the tread-

 

 

78

mill to protect the floor. For your benefit, familiarize

 

 

 

 

 

yourself with the information on pages 27 and 28.

 

 

 

If you purchase the optional chest pulse sensor (see

1

 

C

page 24), follow the steps below to install the receiver

 

 

 

and the short jumper wire included with the chest pulse

 

 

 

sensor.

 

 

 

1. Make sure that the power cord is unplugged. Remove

 

 

 

the indicated screws from the Console Back (A).

 

 

 

Important: The screws may be different lengths. Keep

 

 

A

track of which screws were removed from which holes.

 

 

Screws

Remove the Console Back.

 

 

2. Peel the paper off the pad on the bottom of the Receiver

2

 

 

 

 

 

(B). Turn the Receiver so the cylinder is on the side

 

 

 

shown, and press the Receiver into the bottom of the

 

 

B

Console Base (D) in the indicated location.

 

 

 

 

 

 

Cylinder

 

 

 

D

3. Connect the included Short Jumper Wire (E) to the wire on

3

 

C

the Receiver (B). Connect the other end of the Short

 

 

 

 

Jumper Wire to the PLS2 jack on the back of the Console

 

 

PLS2

(C). If there is a wire already plugged into the PLS2 jack,

 

 

 

 

Jack

unplug it. Note: The other wires included with the receiver

 

 

 

 

 

may be discarded. The wire tie can be used to tie wires, if

 

 

 

needed.

 

 

 

Make sure that no wires are pinched. See step 1.

 

 

 

Reattach the Console (C) with the screws. Important: If the

 

 

 

screws are not put back into the same holes from which

 

 

 

they were removed, the Console will be damaged.

 

 

E

 

 

 

 

 

 

B

7

Page 6 Page 8
Page 7
Image 7
NordicTrack NTL19920 Careful not to damage the Upright Wire Harness not, Into the Handrail. Do not tighten the Bolts yet
Page 6 Page 8

NTL19920 specifications

The NordicTrack NTL19920, a powerful treadmill, combines cutting-edge technology with user-friendly features to elevate your fitness routine. Designed for both seasoned athletes and casual users, this treadmill offers an impressive array of functionalities that cater to diverse workout preferences.

One of the standout features of the NTL19920 is its robust motor, providing a strong and consistent performance with a continuous horsepower rating. This ensures smooth operation, allowing users to push their limits without experiencing lag or interruptions during their runs. The impressive incline capability enhances the workout experience, enabling users to simulate uphill running for added intensity and calorie burn.

The NTL19920 is equipped with an expansive running surface, allowing for comfortable strides regardless of the user’s height or running style. Its cushioned deck technology provides joint support, reducing impact and minimizing the risk of injury during long sessions. This focus on user comfort ensures longer workouts without excessive strain.

Incorporating advanced interactive technology, the NTL19920 features a large touchscreen display that provides real-time workout stats, including speed, distance, time, and calories burned. The embedded iFit technology offers a library of on-demand workouts, led by professional trainers who guide users through various training programs. With iFit, users can explore global running trails or follow studio-style classes, ensuring a dynamic and engaging workout experience.

Another notable characteristic of the NTL19920 is its Bluetooth connectivity, which allows users to sync with fitness apps and track their progress over time. This integration with technology supports users in setting and achieving fitness goals effectively. Additional features include built-in speakers for an enhanced auditory experience, as well as adjustable fan settings to maintain comfort during intense workouts.

The NordicTrack NTL19920 stands out for its combination of innovative technology, ergonomic design, and a comprehensive workout experience. With its high-quality construction and user-centric features, it remains a top choice for anyone serious about improving their fitness journey. Whether running, walking, or engaging in interval training, this treadmill offers the tools necessary for success, making every workout feel tailored and effective.
Top Page Image Contents