Nortel Networks 1100, 1050, 1010 manual Warning Risk of injury

Chapter 2 Installing option cards in the Nortel VPN Router 1100 37

7Remove the four screws on the sides of the VPN Router 1100.

8Slide the chassis cover away from the base.

The VPN Router 1100 system board is now exposed. Figure 14 on page 37 shows the location of the option card slots on the system board.

9Locate the slot where you plan to install the new or replacement option card (Table 11 on page 35).

Figure 14 VPN Router 1100 system board

CPU

Compact flash

DIMM

Option card

slots

Slot 3

Slot 2 10678FA

Warning: Risk of injury

Beware of danger if you incorrectly replace the battery. Replace the battery with the same type or an equivalent battery only, as recommended by the manufacturer’s instructions. In spite of this warning, which is mandated for regulatory approval, you must not change the battery. If you suspect a dead battery, contact Nortel Customer Support.

Nortel VPN Router Installation — VPN Router 1010/1050/1100