Nortel Networks 1050, 1100, 1010 manual and all subsequent versions 7.00.062

48 Appendix A Technical specifications

•6.05.140 and all subsequent versions

•7.00.062

•7.05.100 and all subsequent versions (FIPS branch)

•7.05.300 and all subsequent versions

The following figures show the full and half-height Ethernet faceplates for the VPN Router 1100.

Figure 18 VPN Router 1100 full-height 1000BASE-T (1000 GT)

The full-height model is for installation in slot 2; the half-height model is for installation in slot 3.

Figure 19 VPN Router 1100 half-height 1000BASE-T (1000 GT)

Select cables for this card as follows. Keep in mind that this card is auto-negotiating and uses the highest possible data rate:

•For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair each for transmit and receive operations. The cable must comply with the EIA 568 wiring specification. Nortel recommends a maximum length of 100 meters for the cable segment.

•For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.

NN46110-313 02.01