Nortel Networks 1010, 1050 T1/E1 CSU/DSU WAN interface card LEDs, Hardware overview, NN46110-313

Models: 1010 1050 1100

1 64
Download 64 pages 14.75 Kb
Page 32
Image 32
32Chapter 1 Hardware overview

32Chapter 1 Hardware overview

Table 8 describes the LEDs on the ADSL WAN interface card.

Table 8 LED indicators on the ADSL WAN interface card

CONN LED

Tx/Rx LED

Description

 

 

 

Steady green

Steady green

The ADSL interface card is not initialized; the

 

 

software driver is not installed.

Off

Off

The ADSL interface card is initialized, but has not

 

 

established a link with the ADSL network.

Flashing green

Off

The ADSL interface card is attempting to establish a

 

 

link with the ADSL network.

Steady green

Off

The ADSL interface card has established a link with

 

 

the ADSL network.

Steady green

Flashing green

The ADSL interface card is sending or receiving

 

 

network data. (The LED can be dim.)

T1/E1 CSU/DSU WAN interface card LEDs

Figure 12 shows the LEDs on the T1/E1 CSU/DSU WAN interface card.

Note: The brackets of the full-height and half-height T1/E1 CSU/DSU cards are almost identical. The LEDs on the two cards indicate the same conditions.

Figure 12 LEDs on the T1/E1 CSU/DSU WAN interface card

LED 1, Red

LED 2, Blue

 

 

 

 

 

 

LED 4, Green LED 3, Yellow

CS160012A

NN46110-313 02.01

Page 32
Image 32
Nortel Networks 1010, 1050, 1100 manual T1/E1 CSU/DSU WAN interface card LEDs, Hardware overview, NN46110-313