User Option menu

View Terminal Type

The Terminal Type option shows the type of PBX used by the system.

Note: The Terminal Type option is for display purposes only. You cannot edit this option.

To view the Terminal Type:

Terminal Type

Up

1.Press and hold the Function key when in standby mode.

2.Use the Up and Down buttons to scroll through the menu and select Terminal Type.

3.Press the Select button (or the OK soft key) to select the option. The terminal type displays.

4.Do one of the following:

Press the Up soft key to return to the previous menu and set another option.

Press the Power Off/End Call key to exit all menus and return to the standby state.

Note: You can also press the Exit soft key from the top-level menu to exit and return to the active (off-hook) state.

43

Page 43
Image 43
Nortel Networks 2210 manual View Terminal Type