Nortel Networks 2330 quick start Configure Dial peer for FXS phones

39

20.Configure Dial peer for FXS phones:

dial-peer voice pots 1 destination-pattern 74001 port 2/1 forward-digits all

no shutdown exit pots

dial-peer voice pots 2 destination-pattern 74002 port 2/2 forward-digits all

no shutdown exit pots

21.Configure Dial peer for PRI interface and (optionally) apply translation profile. (Following dial peer is for calls coming from SPS with a number starting with 53 to be translated to a number starting with 3353 before sending on PRI. Don’t use translation profile if no translation required. )

dial-peer voice pots 3 destination-pattern 53.% port 3/1 forward-digits all

no shutdown translation-profile outgoing sps2pstn exit pots

(Following dial peer is for calls coming from PSTN with a number starting with 3353 to be translated to a number starting with 53 before sending to SPS. Don’t use translation profile if no translation required. )

dial-peer voice pots 4 destination-pattern 3353.% port 3/1 forward-digits all

no shutdown translation-profile incoming pstn2sr exit pots

￿If no translation required than instead of dial-peer 3 and 4, only 1 dial peer is required with destination-pattern 53.% (assuming that all PRI numbers are starting with 53).

￿Following is an example if a 911 call is to be routed to PRI interface.

dial-peer voice pots 5 destination-pattern 911 port 3/1 forward-digits all

no shutdown