Preparing the POTS Splitter
"Procedure
1. Unscrew the closure screw and open | Lever | |
the housing by pressing on the lever | ||
| ||
on the right above the closure screw. |
|
2. Remove the rubber grommet at the base of the POTS splitter.
3. Make a small diagonal cut in the rubber grommet to feed the wiring through.
4. Replace the rubber grommet at the base of the POTS splitter.
Closure
Screw
Rubber
Grommet
P1 P2 P3 P4
Base of |
|
POTS Splitter |
4