Telephone Network Interface Device (NID) |
| |
Customer Premises | Demarcation Point | |
Tip |
|
|
T1 |
|
|
(Green) |
|
|
Ring |
|
|
R1 |
|
|
(Red) |
|
|
Existing POTS |
| DSL/POTS |
| From Local | |
Wiring to | Ground | Loop |
Telephone | ||
|
| |
3.Disconnect the POTS wiring to the telephone from the T1/R1 connectors on the customer premises side.
4.Feed the disconnected POTS wiring through the POTS splitter rubber grommet access opening created at the base of the POTS splitter. Connect the wiring to the right side labeled PHONE. Attach green to P3 and red to P4. Tighten both terminal screws with a
POTS Splitter
LINE PHONE
P1 P2 P3 P4
Red
Green
To
Telephone
6
