Technical Configuration Guide for SNMP | v2.0 | December 2006 |
7.2Configuration Example: Changing the Default SNMP Community Name with Release 3.7 or 4.1
By default, the ERS 8600 public and private communities are configured using the names first and second respectively. You can view the SNMP community table by using the following command. Notice the community names, public and private by default, are asterisk out.
•
========================================================================
Community Table
========================================================================
IndexNameSecurity Name Transport Tag
first | ******** | readview |
second | ******** | initialview |
3 out of 3 Total entries displayed
To change the default public/private SNMPv1, SNMPv2, and SNMPv3 community name, enter the following command:
•To change the default public community name, in this example to ro567pp8600, enter the following command:
o
•To change the default private community name, in this example to rwa123pp8600, enter the following command:
o
7.3Configuration Example: Adding a New SNMP Community to an Existing SNMP Group Member
If you use an existing group member in the VCAM table, a new community can be simply added. To view the SNMP VACM and MIB view, the following commands can be used
•To view the VACM Membership configuration, enter the following command: o
•To view the VCAM Group Access configuration, enter the following command: o
•To view the SNMP MIB View, enter the following command: o
For example, if you wish to add a new community named pp8600579 with read/write access, enter the following command:
•
______________________________________________________________________________________________________
NORTEL | External Distribution | 29 |
