Technical Configuration Guide for SNMP | v2.0 | December 2006 |
•
F)Add User 2 to USM table. In this example, we will use a user name of ‘user2’, and a MD5 password of ‘user2abcd.
•ERS-8610:5# config snmp-v3 usm create user2 md5 auth user2abcd
G)Add User 2 to USM group. We will add User 2 to the group named ‘group_1’ created above.
1.Add ‘user2’ to group ‘group_1’:
•ERS-8610:5# config snmp-v3 group-member create user2 usm group_1
H)Assign Access Level to USM group:
1.Assign access level of ‘authNoPriv’ to usm group ‘group_1’
•ERS-8610:5# config snmp-v3 group-access create group_1 "" usm authNoPriv
I)Create a new MIB view to exclude the private MIB for User 2
1.In this example, we will add a new MIB view named ‘private’ to exclude access to the SNMP Private MIB
•
J)Assign the Read and Write view to the usm group:
1.Assign to usm group ‘group_1’ read view to ‘org and write MIB view to ‘private’:
•
8.1Testing SNMPv3 Using Device Manager
Now that you have created two new users, you can test the configuration by using Device Manager. The window shown below displays the parameters entered for user1.
|
|
| Enter user1 for User Name |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Select MD5 for Authentication Protocol |
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Enter user1234 for Authentication Password |
| |||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
|
|
|
| Select DES for Privacy Protocol |
|
|
| ||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
|
|
|
| Enter userpriv for Privacy Password |
|
| ||
|
|
|
| ||||||
______________________________________________________________________________________________________ |
|
| |||||||
NORTEL | External Distribution | 35 |
|
|