Nortel Networks 8600 manual ERS-86065# config sys access-policy enable true/false

Technical Configuration Guide for SNMP v2.0 December 2006

To add an access policy, you must first enable the access policy feature globally by entering the following command:

•ERS-8606:5#config sys access-policy enable <true/false>

After the access policy feature has been enabled globally, to add a new access policy, enter the following command:

a)Add a new policy

•ERS-8606:5#config sys access-policy policy <1..65535>

b)After entering the above command, enter the appropriate parameters:

•ERS-8606:5#config sys access-policy policy <1..65535> ?

Sub-Context: service Current Context:

accesslevel <rorwrwa> access-strict <truefalse> create

delete disable enable

host <ipaddr> info

mode <allowdeny> name <name> network <addr/mask> precedence <precedence> username <string>

c)Add the services to the newly created access policy:

•ERS-8606:5#config sys access-policy policy <1..65535> service ?

Sub-Context: Current Context:

ftp <enabledisable> http <enabledisable> info

rlogin <enabledisable> snmp <enabledisable> ssh <enabledisable> telnet <enabledisable> tftp <enabledisable>

Please refer to publication number 314997-C titled Important Security Information for the 8000 Series Switch for more details on Access Policies.

______________________________________________________________________________________________________

NORTEL External Distribution 8