Nortel Networks 8691SF manual Installing switch software, 211802-A

Installing switch software

To install the new switch software:

1Power up the system and interrupt the boot process by pressing return on the console.

Copyright (c) 1998-2001 Nortel Networks, Inc.

CPU Slot 5: PPC 740 Map B

Version: xxxxxxx

Creation Time: Feb 21 2001, 18:06:32

Hardware Time: JUN 14 2001, 13:11:32 UTC

Memory Size: 0x04000000

Start Type: warm /flash/ - Volume is OK

Loaded boot configuration from file /flash/boot.cfg

2Press <Return> to stop auto-boot...

monitor#

3Set up the new software version to boot:

monitor# choice primary image-file /flash/p80a3120.img

4Save this configuration. monitor# save

5Install the boot monitor.

monitor# boot /flash/p80b3120.img

################ 8K CPU BOOT FLASH Update ################

File p80b3100b018.rom found in loaded image File size: 624996 bytes

Number of flash sectors to be programmed: 10

WARNING: You are about to re-program your Boot Monitor FLASH image. Do NOT turn off power or press reset until this procedure is completed. Otherwise the card may be permanently damaged!!!

Do you wish to continue (y/n) ? y

After this the system will come up with the new software version.

*211802-A*