Nortel Networks BCM 450 manual To configure conference settings

Telephone features

To configure conference settings:

1.To change conference settings, press 2.

2.To permit QuickStart, press 1. Otherwise, press #.

If you press 1, future conferences will start when the participants arrive.

If you press #, future conferences will start when the chairperson arrives.

Note: When you enable the QuickStart feature on a Meet Me Conferencing bridge that external conference participants can access by using a 1-800 number, there is a risk that your company can incur unauthorized toll charges. To avoid this type of fraud, do not enable the QuickStart feature on a conference bridge that can be accessed with a 1-800 number.

3. Configure how the conference will end:

To allow the conference to continue after you disconnect, press 1.

To terminate the conference when you disconnect, press

#.

To access the conference call as a participant:

1.Press FEATURE 930.

2.If prompted, say your name.

3.If prompted, enter the passcode.

For more information about using the Meet-Me Conferencing feature, see the Meet-Me Conferencing User Guide.

Page 11