Nortel Networks BCM 450 Contrast adjustment To split a conference, To re-establish the conference

Telephone features

Contrast adjustment

To split a conference:

Press the line or intercom button of one caller to consult privately while the other caller is on hold.

Note: This feature is not available for multi-party conference calls.

To re-establish the conference: Press FEATURE 3.

To disconnect one party:

1.Press the line or intercom button for the caller you want to disconnect.

2.Press RLS.

3.Press the line or intercom button to resume your conversation with the other caller.

To independently hold two calls:

1.Press the line or intercom button of the first caller.

2.Press HOLD. The second caller is automatically put on hold. Note: This feature is not available for multi-party conference calls.

To re-establish the conference:

1.Retrieve one call from hold.

2.Press FEATURE 3.

3.Retrieve the second call from hold.

To send Hookswitch or DTMF during a conference call:

Either system telephone engaged in a three-way conference call over a Network CLID or DS trunk can issue a hookswitch or DTMF dialing request without leaving the conference, if the feature is enabled.

Note: This feature is not available for IP Phones 20xx.

–To hear DTMF tones on these telephones during dial, activate Long Tones (FEATURE 808).

–To conference in another party through the trunk, use Link (FEATURE 71)

FEATURE *7 plus a number from 1 to 9 to adjust the display contrast. Press HOLD to set your choice.

Page 7