Meet-Me Conferencing

Dial into a conference call at a specified phone number and specified time.

To access the conference call as the chairperson:

1.Press FEATURE 930.

2.Follow the prompts.

3.Enter your PIN and press #.

4.Choose one of the following options:

Press 1 to enter the conference.

Press 2 to set a passcode for participants.

Press 3 to change the conference settings.

1.Enter a passcode for participants to use and press #. The passcode must be between 2 and 8 digits in length.

2.Enter the passcode again to verify it, and press #.

3.Choose one of the following options:

Press 1 to enter the conference.

Press 3 to change the conference settings.

Page 10

Image 10

Contents

Telephone Features User Guide Date AugustPage Telephone button icons Symbols used in this guide Feature Telephone featuresFeature *0 Conference Class of ServicePassword Establish a three-party conference call To independently hold two calls Contrast adjustment To split a conferenceTo send Hookswitch or Dtmf during a conference call To re-establish the conference Cancel Feature #802 Dialing modes Feature *82Cancel Feature #85 Do Not Disturb Cancel Feature #84 Hold Feature 79 or FEATURE/HOLD ExclusiveCancel Feature #73 Hold Auto Meet-Me Conferencing To access the conference call as the chairpersonTo set a passcode for the conference To configure conference settings To access the conference call as a participant Feature *81 Internal and external InternalExternal Incoming page during active call Feature *80 Feature *6Feature *9 Cancel Feature #872 ServiceCancel Feature #871 Services Time Cancel Feature #70Cancel Feature #88 Briefly display the time and date while you are on a call Call Display Services Feature *84 With your system administrator Etsi featureFeature *85 Logit Using feature Feature *900 IP telephone featuresMenus Activate a display menu of feature options Setting up Hot Desking Feature *999Setting up Hot Desking Hot Desking De-activating Hot Desking Cancelling Hot Desking activating To activate Hot Desking