Nortel Networks BCM 450 manual Hot Desking activating To activate Hot Desking

IP telephone features

Hot Desking - activating

To activate Hot Desking:

On the telephone to which you are diverting your calls (yyy).

1.Enter Hot Desking.

2.Press Divert.

3.At the DN prompt, enter the DN of your telephone (xxx).

4. Press OK. The display reads Enter < > PW.

5.Enter the password for your telephone (xxx).

6.Press OK.

Hot Desking - De-activating Hot Desking

cancelling	Hot Desking can be cancelled from either IP telephone.
	Ensure that the telephone is on-hook before cancelling Hot Desking. There
	can be up to a 10-second delay after the call ends before the system allows
	you to cancel Hot Desking. This period can vary, depending on the call type.

On the active telephone (yyy):

1.Enter the Hot Desking feature. The display reads: Cancel Hot Desking?

2.Press Yes to cancel Hot Desking. The telephone displays of both sets return to normal.

To cancel Hot Desking on the diverted telephone (xxx), press CANCEL.

Automatic cancellation occurs if the telephone re-boots, is unplugged, or is hot-desked by a third telephone.

Hot Desking - If you forget your Hot Desking password, ask your system administrator to

reset reset the password for your telephone. This allows you to access Hot

password Desking on your telephone and enter a new password.

Time zone - Use this feature to reset the time on an IP telephone that is located in a

adjust different time zone from the system on which it is registered. FEATURE *510.

Page 21