Nortel Networks BCM 450 manual Feature *6, Feature *80, Feature *9

Telephone features

Priority call	FEATURE 69
	Interrupt a person on a call.
	A person on another call can press FEATURE 85 (Do Not Disturb) to block
	priority calls.

	Variances
	*(ringing call)
Privacy	FEATURE 83
	Change the privacy setting for an external line. If a line normally has
	privacy, this enables another telephone that shares the line to join your call
	by selecting the line in use. If a line normally has privacy disabled, this
	prevents another telephone that shares the line from joining your call by
	selecting the line in use. The privacy setting is re-established once you end
	your call, or when you enter the Privacy feature code again.
Ring again	FEATURE 2	Cancel: FEATURE #2
	Monitor a busy or unanswered telephone, or a busy line pool within your
	system. Ring Again signals you to call back when the telephone or line
	pool becomes available.
Ring type	FEATURE *6
	Select a distinctive ring to help differentiate between your telephone from
	others nearby.
	1. Press FEATURE *6.
	2. Enter the ring type number (1 to 4).
	3. Press HOLD.
Ring volume	FEATURE *80
	Make your telephone ring so that you can adjust the volume. You also can
	adjust the volume any time your telephone rings.
Run/stop	FEATURE *9
	Store more than one autodial number or external carrier feature code on
	one memory button by inserting a break point between numbers or codes.
	The first press of the button dials the first number or code; the next press
	dials the next number or code. You can program up to four numbers or
	codes separated by break points.
Saved number	FEATURE 67
redial	Save a number to redial later. Enter the code while you are on a call that
	you have dialed to save the number. Enter the code when you are not on a
	call to redial the saved number.

Page 14