Nortel Networks IP Phone 1100 specification

22 Chapter 3 Installing the expansion module

Installing a second or third expansion module

Caution: Damage to equipment

To avoid damaging the equipment, remove the power (PeE cable or local power) from the IP Phone before you connect the expansion module.

You need a Phillips head screwdriver to complete this procedure.

1Attach the second expansion module to the right side of the first expansion module.

2Adjust the tilt of the IP Phone to a comfortable viewing angle.

3Adjust each of the expansion module foot stands so they are flush with the desk surface.

4Turn the wheel on the back right-hand side of the expansion module to the right (if viewed from the front) to tighten the expansion module.

Warning: Do not over tighten the wheel on the expansion module.

5Connect power to the IP Phone. The expansion module powers up.

Note: The expansion module uses the electrical connection of the IP Phone for power. The expansion module does not have its own power source.

6If required, repeat steps 1 to 5 to attach a third expansion module to the right side of the second expansion module.

NN40050-118

Image 22

Nortel Networks IP Phone 1100 manual Installing a second or third expansion module

Contents

Expansion Module for IP Phone 1100 Series User Guide Copyright Nortel Networks 2007, All rights reserved Task List Task List NN40050-118 Contents Contents NN40050-118 Regulatory and safety information Other EMC compliance Regulatory and safety information EMC compliance AS/NZS DenAn regulatory notice for Japan Regulatory and safety information NN40050-118 How to get help Getting Help from the Nortel Web site How to get help NN40050-118 Audience Getting startedAbout this guide Acronyms Symbols and conventions used in this guide Related publications Expansion module overview IntroductionWall mounting Display IP Phone 1140E with expansion module Services key Setup and assemblyControls and settings Shift/Outbox key Display Diagnostics menu Full Contrast Installing the expansion module Installing an expansion module Installing a second or third expansion module Adjusting the tilt base Mounting the expansion module and phone on a wall Installing the expansion module NN40050-118 Expansion module startup initialization Initializing the expansion module Expansion module startup initialization NN40050-118 Making a call using the speakerphone key Using the handsetMaking a call using a line key Putting a call on hold Erasing a programmed indicator keys Programming indicator keysProgramming a feature Programming external autodial