Nortel Networks S640 Charging the Battery, Prepare the Charging AC Adapter EH-68P, EH-68P AR

Charging the Battery

First Steps

Charge the supplied Rechargeable Li-ion Battery EN-EL12 inserted into the camera, by connecting the supplied Charging AC Adapter EH-68P to the camera via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter into an electrical outlet.

1 Prepare the Charging AC Adapter EH-68P.

If a plug adapter* is included, attach the plug adapter to the plug on the Charging AC Adapter. Push the plug adapter firmly until it is securely held in place. Once the two are connected, attempting to forcibly remove the plug adapter could damage the product.

*The shape of the plug adapter varies

according to the country or region in which the camera was purchased.

For Customers in Argentina

If the camera was purchased in Argentina, the shape of the Charging AC Adapter EH-68P (AR) differs from that supplied in other countries, and a plug adapter is not included. Proceed to step 2.

EH-68P (AR)

2 Be sure that the power-on lamp and the monitor are off.

•Be sure to insert the battery into the camera (A 14) and turn off the camera (A 19).

3 Use the supplied USB cable to connect the Charging AC Adapter to the camera.

BConnecting the Cable

When connecting the cable, be sure that the camera connector is properly oriented. Do not use force when connecting the cable to the camera. When disconnecting the cable, do not pull the

16connector at an angle.