Nortel Networks S640 user manual Taking a Closer Look Playback Zoom, Description Zoom

Taking a Closer Look: Playback Zoom

More on Playback/In-Camera Editing

Rotating the zoom control to g (i) during full-frame playback mode (A 30) zooms in on the current picture, enlarging and displaying the center of the picture on the monitor.

• The guide at lower right shows which portion of the picture is enlarged.

The following operations can be performed while pictures are zoomed in.

To	Use	Description	A
Zoom in	g (i)	Zoom increases each time the zoom control is	–
		rotated to g (i), up to about 10×.
Zoom out		Rotate the zoom control to f (h). When the
	f (h)	magnification ratio reaches 1×, the display	–
		returns to full-frame playback mode.
Move the display		Press the rotary multi selector H, I, J or K to
		move the display area to other areas of the	10
area
		picture.
Return to full-frame	k	Press the k button.	30
playback
Crop picture	d	Press to crop the current picture to contain only	75
		the portion visible in the monitor.
	A
Switch to shooting		Press the Abutton or the shutter-release	30
mode		button.

Pictures Taken Using the Face Priority Function

When zooming in (playback zoom) on a picture taken using the face priority function (A 106), the picture will

be enlarged with the face detected with shooting at the

center of the monitor (excluding pictures that were shot using Continuous, BSS and Multi-shot 16 (A 101)).

• If more than one face was detected, the picture will be enlarged with the face on which focus was acquired at

the center of the monitor. Press the rotary multi selector H, I, J, or K to display other faces that were detected.

•When rotating the zoom control towards the g (i) or f (h) direction to adjust the zoom ratio, the center of the picture (normal playback zoom display), rather than the face, is displayed at the center of the monitor.

60