North Star M157300E owner manual Operation Instructions, Risk of exposure to dangerous chemicals

Operation Instructions

Applying Chemicals

1.) Install the black nozzle when applying chemicals onto the cleaning surface.

2.) Start the pressure washer according to the start-up instructions.

3.) Submerge the chemical hose in cleaning solution.

4.) Squeeze the spray gun trigger. The chemical injector will draw the chemical into the water stream.

5.) Apply chemicals evenly onto the cleaning surface. Allow the chemicals to react with the dirt, then clean at high pressure with high pressure (green or yellow) nozzle.

6.) Never use more chemical than is necessary to clean the surface.

7.) To clean the chemical injector, draw water through the strainer until all the chemical is purged from the system.

pump

pump outlet

pump inlet

diluted chemical

strainer

WARNING

Risk of exposure to dangerous chemicals.

Serious injury or death can result if chemical manufacturer instructions are not followed.

-Wear protective gloves when handling and cleaning with chemicals.

-Understand all safety hazards and first aid for all chemicals being used. -When cleaning filters, check if chemicals have been used and take any precautions that are recommended by the chemical manufacturer.

-Different chemicals may interact dangerously with each other, always follow chemical manufacturer directions before switching chemicals.

-Calculate the correct amount of chemical to mix, dispose of excess chemical per the manufacturer instructions.

-Never spray flammable liquids.

15