North Star M157305G Cleaning The Inlet Filter, Checking the Tire Air Pressure, Burner Fuel Filter

Models: M157305G

1 24
Download 24 pages 63.19 Kb
Page 14
Image 14
Cleaning The Inlet Filter

Cleaning The Inlet Filter

WARNING: Check whether dangerous chemicals have been used, and take precautions when handling filters.

Screen

FIG02300

A.) Unscrew clear tube by hand.

B.) Remove Inlet filter

C.) Run water though to clean filter

Checking the Tire Air Pressure

A.)

Remove air fill cap

B.)

Fill tire to 20psi (1.4bar)

C.)

Replace air fill cap

Air Fill Stem Checking the Tire Air Pressure

Air Fill Cap

Burner Fuel Filter

Drain water which has accumulated in the fuel filter bowl and replace the filter as needed.

00425Filter

Water Drain

Checking the Hoses

WARNING: Do not use a finger or skin to check for leaks. Escaping fluid under pressure has sufficient force to penetrate the skin, causing serious injury. Do not operate the pressure washer if the hose is cracked, worn, or leaking.

A.) Check all hoses for leaks

B.) Check all hoses of worn areas

Good

Bad

Water

Bad

Wire Mesh

Changing The Pump Oil

*Change oil after first 50 hours, then every 3 months or 500 hours

1.) Remove oil drain plug on Cat pumps.

2.) Drain pump oil.

3.) Replace oil drain plug.

4.) Fill pump oil according to table below.

5.) Use dip stick to fill to proper level or sight glass on Cat pumps. On Comet pumps, fill with the correct measured amount of UTTO.

Quantities Of Fluid

Pump

Type of Fluid

QTY

Comet

UTTO*

5.0 oz (0.15L)

CAT

SAE 30**

8.5 oz (0.25L)

*Universal Tractor Transmission Oil of Mobil 1 15W50 **Non-Detergent Oil (order pump oil Item #22158)

Comet

Cat

Pump

Pump

Oil

 

Fill/Drain

Oil Fill

Oil Drain Plug (Underneath)

14

Page 14
Image 14
North Star M157305G Cleaning The Inlet Filter, Checking the Tire Air Pressure, Burner Fuel Filter, Checking the Hoses