North Star M157305G II. Assembly Instructions, Description, Wheel Retainer, Axle, Grease Zerk

II.) Assembly Instructions	Wheel Retainer
A. 1. Carefully raise the pressure washer off the floor by	Axle
using blocks or ramps. Make sure the pressure
washer is secure before proceeding.

2.Install the two wheels as shown with grease zerk away from frame.

3.Slide the two wheel retainers onto the end of the

axle. Tighten the set-screw with a hex wrench.

Description	Qty.
Wheel	2
Wheel Retainer	2
	Wheel

Grease Zerk

B.1. Install the pressure hose onto the pressure washer as shown.

2. Connect the other end of the pressure hose to the spray gun as shown.

3. Make sure all plumbing connections are tight.

Description	Qty.
Spray Gun/ Lance	1
Spray Hose	1

7